 |
|
Hot Rod Jim's has sold the TriFive Frame design to our sister shop Nerd Rods. They now have a version of our orignal design that is all CNC Laser cut and is now available in a weld it yourself kit frame version. Check out their site for more info. www.NerdRods.com |
|
 |
- This is the Kit for the do it yourself people.
- No Major Fabrication
- Nut and Bolt Kit included
- Hot Rod Jim’s replacement arms included
- Click Here for more information
|
|
 |
- Bare Frame "Not-Powder Coated" for Custom Mods and Finishing
- C4 Corvette Front and Rear Suspension
- Power Rack and Pinion AC Delco Rebuild
- Rebuilt, Sandblasted and Painted Aluminum Components
- QA1 Coil Over Shocks, your choice Ultra Ride or Proma-Star
- All Grade 8 Hardware
- Click Here for More Information
|
|
 |
 |
- Stage 3 or the "Basic" Rolling Chassis
- Frame supplied powder coated
- C4 Corvette suspension remanufactured, refinished and installed.
- 11.5" front and rear brake rotors with single piston calipers.
- This chassis has a 60.5" wide suspension, only .5" wider than stock.
- Only requires a 15” wheel to clear the disk brakes.
- Click here for information on the “Basic” rolling chassis with QA1 coil over shocks.
- Click here to learn about the softer lower “Basic” with Air Ride Technologies Shockwaves.
|
|
 |
 |
- Stage 4 or "Grand Sport" Chassis.
- Powder coated frame and refinished aluminum parts.
- Wider Suspension with better suspension geometry.
- Requires deep wheels found on almost every GM sport car from 1988 and up.
- 13" front rotors with 2 piston calipers 12" rear rotors with 1 piston calipers.
- All Grand Sport Chassis have the “Corvette Logo” on the front calipers.
- Requires 17" rims to clear the calipers.
- Click here to learn more about the "Grand Sport" with QA1 Ultra Ride coil over shocks
- Click here to learn more about the "Grand Sport" with Air Ride Technologies Shockwaves.
|
|
 |
 |
- Stage 4 or "C4 Z06"
- Uses the C4 suspensions and brakes from the 2006 and up C6 Z06 Corvette.
- This chassis look like a Z06 Corvette but without the expensive modifications.
- Front 14” Rotors and 6 Piston Calipers Rear 13.6” Rotors and 4 Piston Calipers
- All Calipers come with Corvette Logos.
- The Z06 chassis requires at a minimum of 18” wheels to clear the calipers
- The Z06 requires wheels with 2-3 inches of back spacing
- Click here to learn more about the "Z06" with QA1 Ultra Ride coil over shocks
- Click here to learn more about the "Z06" with Air Ride Technologies Shockwaves.
|
|
 |
Click here to go to the Upgrades Page for the TriFive Chassis
|